|
OEM COMPATIBLE
Blower Wheels
|
These OEM compatible blower wheels may be used as an adequate substitute for most similar factory original blower wheels. Note - Check all of the following: (1)rotation direction, (2)concave(CC)/convex(CV)/flat(FL) character of wheel’s center baffle, (3) diameter, and (4) depth (height) of blower wheel. Diameter has an approximate tolerance of +/- 3/8”, depth (height)+/- 1/4”. Actual housing may allow for an additional 3/8” tolerance for the diameter. It is important to match the size and character as closely as possible due to the fact that blower wheel is matched to the horsepower of motor & air flow requirements of furnace. |
|
Note - Blower Wheel dimensions are listed in the individual part title as follows:
Diameter X Depth (Height) X Bore/Shaft Diameter.
Blower Wheels on this page are listed by diameter in ascending order.
Also indicated are rotation direction: Clockwise, (CW) or CounterClockwise, (CCW)
& character of wheel’s center baffle (2)concave(CC)/convex(CV)/flat(FL). |
|
Blower Wheel
9-1/2" X 9-1/2" X 1/2" Bore CW - CV |
|
Blower wheel with diameter which
measures approx. 9-1/2", approx.
depth (height) of 9-1/2”. Clockwise
direction, Convex wheel with a 1/2”
bore. Replaces 01333201 blower
wheel and others. |
|
Blower Wheel
10-1/8" X 7-1/8" X 1/2" Bore CW - CV |
|
Blower wheel with diameter which
measures approx. 10-1/8", approx.
depth (height) of 7-1/8”. Clockwise
direction, Convex wheel with a 1/2”
bore. Replaces 01332501 blower
wheel and others. |
|
Blower Wheel
10-5/8" X 10-5/8" X 1/2" Bore CW - CC |
|
Blower wheel with diameter which
measures approx. 10-5/8", approx.
depth (height) of 10-5/8”. Clockwise
direction, Concave wheel with a 1/2”
bore. Replaces 01331602 blower
wheel and others. |
|
|
Blower Wheel
9-1/2" X 7-1/8" X 1/2" Bore CW - CV |
|
Blower wheel with diameter which
measures approx. 9-1/2", approx.
depth (height) of 7-1/8”. Clockwise
direction, Convex wheel with a 1/2”
bore. Replaces 01333602 blower
wheel and others.
|
|
Blower Wheel
9-1/2" X 8" X 1/2" Bore CW - CV |
|
Blower wheel with diameter which
measures approx. 9-1/2", approx.
depth (height) of 8”. Clockwise
direction, Convex wheel with a 1/2”
bore. Replaces 01333701 blower
wheel and others. |
|
Blower Wheel
11-1/8" X 8" X 1/2" Bore CW - CV |
|
Blower wheel with diameter which
measures approx. 11-1/8", approx.
depth (height) of 8”. Clockwise
direction, Convex wheel with a 1/2”
bore. Replaces 01332401 blower
wheel and others. |
|
|
|
|
