Rheem 70-24157-03
Draft Inducer Assembly |
|
Rheem 70-24157-03 Draft Inducer
Blower Motor. H.P. 1/20, RPM 3400,
120 Volts. Works with the following
Rheem brand models: RGDG, RGDJ,
RGLGO, RGPH, RGVG, RGLH. Also,
Ruud models: UGDG, UGLH, UGDJ,
UGPH, UGLGO and UGVG. Replaces
the following: 70-24157-03, 70-22838-02,
70-22838-82, 70-24178-01, 70-24175-01,
70-24175-81. Also Amtek 117104-01,
117104-04, 117847-07 as well as Fasco
#7021-11559 & Jakel #J238-150-1533.
Also Fits Models...
|
|
Rheem 70-21504-04
Draft Inducer Assembly |
|
Rheem 70-21504-04 draft inducer
(flue exhaust/venter) assembly.
115V, 1/50HP, CCW viewed from
shaft end. Replaces 70-21504-03
70-21496-83 and 70-21496-03. Also,
Goodman numbers B859000 and
Fasco 7021-6808, 7021-6804 and
7021-8183. Also, part number A079.
Fits Models...
|
|
|
Rheem 51-21964-11
Inducer Motor with Fan Blades |
|
Rheem 51-21964-11 direct replacement
draft inducer kit with 3 fan blades for
Rheem/Ruud model furnaces. Usually
used on roof tops and heat/cool units.
Kit contains motor and 3 fan blades
each with 10 blades and 1/4" diameter
bore, in diameters of 3", 3-1/2" and 4".
"C" frame motor with a centrifugal
switch. 208-230 volt. 2000 RPM.
0.25 AMPS. The shaft dimension is
1/4" x 1-1/2".
Fits Models...
|
|
Rheem 70-24033-01
Draft Inducer Assembly |
|
Rheem 70-24033-01 Inducer used on
RGRA or UGRA Induced Draft Blower
w/Gasket. Replaces: 70-24033-81,
70-24357-01. Used in Rheem models:
RGRA, RGRJ, RGSA, RGTA, RGTC,
RGTJ, 90RJ, 90RS, 90TJ, 90TS, RGRS,
RGTS. Used in Ruud models: UGRA,
UGRJ, UGSA, UGTA, UGTC, UGTJ,
UGRS, UGTS. Also Fasco 7062-5177.
Also Fits Models...
|
|
Rheem 70-21876-01
Draft Inducer Assembly |
|
Rheem 70-21876-01 Inducer Blower
Motor for Rheem/Ruud model furnaces.
Replaces: 116517-05, A086, 7021-5990,
021-10266, 7021-3853, 7021-5853,
7021-5963, 021-7104, 7021-7105,
7021-7395, 4MH19, 5C087, 5C088,
JA1N065, JA1N069 and JA1N062.
Fits Models...
|
|
|
